DIY Necklace Holder: 12 Beautiful Ideas to Make at Home

diy necklace holder: handmade wooden necklace stand with brass hooks and hanging necklaces on a bright dresser

A diy necklace holder ends tangled chains and lost clasps, and a necklace deserves a pretty place to hang between wears. In this guide, you will find twelve diy necklace holder ideas to make at home, from a wooden stand with brass hooks to a driftwood wall hanger. Also, most of these holders use wood, frames, and hooks you may already have. Then, pick a favorite, make it in an afternoon, and enjoy a tidy dresser that shows off your jewelry.

What You Need to Make a DIY Necklace Holder

Most handmade necklace holders start with a wooden board, a small stand, or an old picture frame. Useful extras include brass hooks, small knobs, sandpaper, paint, a drill, and a sealant. Also, keep a ruler and a pencil close, because evenly spaced hooks keep necklaces from tangling. In addition, felt pads protect the dresser from scratches. With those supplies ready, you can finish most of these holders in one relaxed afternoon.

How to Make a DIY Necklace Holder

Pick a style that fits your room, because a holder should look as good as it works. Next, sand the wood smooth, and paint or stain it before you add the hooks. Then, space the hooks wide enough for chains to hang free, and test with your longest necklace. After that, mount the holder firmly, and check that it holds steady. Finally, hang your necklaces by length, and enjoy a dresser that stays neat every day.

diy necklace holder: hands sanding and assembling a small wooden jewelry stand on a workbench

12 DIY Necklace Holder Ideas

1. A Wooden Stand with Brass Hooks for DIY Necklace Holders

Cut a small wooden base and an upright post, then screw in a row of tiny brass hooks. Also, stain the wood warm, and add a felt pad underneath. This diy necklace holder classic looks lovely on a dresser, and it keeps chains tangle free.

2. A Wall Peg Rail

Mount a slim wooden rail on the wall, then add evenly spaced pegs and paint them in soft colors. Next, hang necklaces by length, and add a small shelf for rings. This rail saves dresser space, and it turns jewelry into wall art.

3. A Framed Cork Board

Fit cork into an old picture frame, then push in small pins and hooks to hold necklaces. Then, paint the frame gold or white, and hang it near a mirror. This holder is easy to make, and it doubles as a pretty display.

4. A Driftwood Hanger for DIY Necklace Holders

Clean a smooth piece of driftwood, then screw small hooks along its length and hang it with rope. In addition, add a few beads for charm, and mount it above a dresser. This diy necklace holder brings a calm, beachy feel to the bedroom.

5. A Branch Holder

Spray paint a sturdy branch white or gold, then stand it in a heavy vase or mount it on the wall. Next, drape necklaces over the twigs, and add a few earrings. This holder is free, natural, and lovely beside a window.

6. A Mug Tree Repurpose

Take an old wooden mug tree, then paint it and add extra hooks to the arms. Also, hang necklaces from each peg, and use the base for bracelets. This idea gives an old kitchen piece a new life, and it costs almost nothing.

7. An Embroidery Hoop Display for DIY Necklace Holders

Stretch linen in a large embroidery hoop, then add small pins and a ribbon hanger. Then, hang necklaces from the pins, and place the hoop on the wall. This diy necklace holder is soft, pretty, and easy to move.

8. A Shadow Box Organizer

Line a shallow shadow box with velvet, then add tiny hooks along the top edge. In addition, close the glass door, and keep dust away from your jewelry. This box protects delicate chains, and it looks like a boutique display.

9. A Drawer Organizer Tray

Build or line a shallow tray with velvet, then add small hooks on a raised bar at the back. Next, slide the tray into a drawer, and hang necklaces upright. This tray hides jewelry away, and it keeps everything neat.

10. A Mannequin Bust Stand for DIY Necklace Holders

Paint a small dress form or a foam bust, then drape necklaces around its neck. Also, add a ring dish at the base, and place it on the vanity. This diy necklace holder shows how each piece looks when worn.

11. A Leaning Ladder Shelf

Lean a small wooden ladder against the wall, then add hooks to each rung. Then, hang necklaces from the rungs, and place bracelets on the steps. This ladder holds a whole collection, and it suits a boho bedroom.

12. A Picture Frame with Mesh

Remove the glass from a frame, then stretch wire mesh across the back and add small S hooks. Finally, hang necklaces from the hooks, and lean the frame on a dresser. This holder is simple, pretty, and easy to rearrange.

diy necklace holder: wall-mounted wooden peg holder with necklaces and bracelets beside a bedroom mirror

Tips for Great DIY Necklace Holders

Space hooks widely, because crowded hooks cause tangles. Next, always hang necklaces by length, so chains never cross each other. Also, keep the holder away from damp bathrooms, because moisture can tarnish metal. Then, dust the holder weekly, because clean wood and brass always look better. Finally, close clasps before you hang each piece, because closed clasps stop chains from knotting.

Frequently Asked Questions

What is the easiest diy necklace holder to make?

A branch holder. It needs only a clean branch, a vase, and a little paint, and you can finish it in under one hour.

What supplies do I need for a diy necklace holder?

Wood, brass hooks, sandpaper, paint, and a drill are a great start. Then add felt, ribbon, or a frame for your chosen holder.

Can I make a necklace holder without power tools?

Yes, branch holders, mug trees, and embroidery hoops need no drilling. A little glue and paint handle the rest.

How do I stop necklaces from tangling on a holder?

Hang each necklace on its own hook, close the clasp, and leave a small gap between pieces. Then, sort by length, so long chains never wrap around short ones.

Is a wall mounted holder safe for heavy necklaces?

Yes, when you mount it into a wall stud or use strong anchors. Then, test with your heaviest piece before you hang the whole collection.

Final Thoughts

Handmade necklace holders prove that a tidy dresser needs no expensive organizer. With a little wood, a few hooks, and some paint, you can build a stand, a wall rail, or a driftwood hanger that keeps every chain safe. Finally, pick your favorite idea from this list, gather your supplies, and enjoy making a diy necklace holder that shows off your jewelry beautifully.

Call to Action: Start with one holder this week, and finish your handmade necklace holder in a single craft session so you can enjoy it right away. Explore more handmade craft ideas on Hommiest for your next project.

Leave a Reply

Your email address will not be published. Required fields are marked *